Dark water damage Repair Unclogging the Drainage System in Your New Cedar Park Home
Clogging of the sewer lines can be a problem for Cedar Park homes. Clogged drains usually happen when new homeowners don’t pay enough attention to the regular cleaning of sewage lines. The first sign of sewage problem is improper draining of wastewater in the sink or bathrooms. The situation can worsen and can lead to sewage overflows into the home if proper cleaning and remediation of this issue are not taken care of right away.
A sewage overflow can directly affect the health and hygiene of people by spreading severe water-borne diseases like hepatitis A, cholera and typhoid. To help you avoid this happening, we are providing you with the process you may use to remediate this problem without any expert supervision. But make no mistake, dealing with raw sewage can be hazardous to your health. Knowing this, you might want to opt for professional Cedar Park water damage repair.
Before trying to clean up a sewage overflow, you’ll need to make sure you the correct safety equipment. You need to wear protective rubber boots, gloves, and a respiratory mask to prevent coming into direct contact with the contaminated water that can contain all sorts of pathogens, germs, and bacteria. After cleaning up the overflow, and disinfecting the area, you’ll want to work on the clogged toilet or drain.
Cleaning a Clogged Drain
After ensuring your protection, take a cup of baking soda and pour it into the clogged drainage system. Then add 2 cups of vinegar and pour it into the same drain so that it gets mixed with baking soda. You can increase the amount of vinegar if the need arises. When the baking soda comes in contact with the vinegar, it will generate carbon dioxide. This carbon dioxide will create bubbles which will force down the drain eliminating to clogging. When the drainage system is clear with of the clog, pour hot water in the system and flush the system several times to ensure all the waste is cleared and the drain is working properly.
Sewage Overflow Is Best Lefts to the Professionals
This is one of the safest DIY ways to handle sewage malfunction situation on your own. Also, If you are successful, this will help eliminate the risk of further serious drainage problems. But, it is advised, if you are not sure of handling this process on your own, you should seek professional Cedar Park water damage repair. These Pro’s have experience and all the right equipment to tackle such problems quickly and safely.
Out of Control Mold Growth is a Health Hazard
Indoor mold is a common inconvenience to homeowners. Houses that are home to certain types of indoor mold can be the cause of asthma, infections, cough, trouble breathing, and often, headaches.
Mold needs Moisture
Mold is most likely to form around areas in the walls, ceilings, floors, carpets and other places where water damage or water leakage may/have occurred. As we know, the mold thrives in moist areas.
The Most Dangerous Molds
Dangerous types of indoor mold include Stachybotrys or Cladosporium, which both are dark in color or Aspergillus, which is light in color. There are some other types of mold. When inspecting an indoor mold, you should not inhale too deeply, and it is good practice to wear a small mask covering your nose and mouth.
To keep your home as mold-free as possible, follow these tips:
*Use kitchen, bath, and laundry room fans/ventilation to keep humidity in your home to a minimum.
*If it is hot and humid in your home, run the air-conditioner.
*If it is cold outside, you can use a dehumidifier to control the humidity in your home.
* Use baking soda to clean carpeted areas in your home on a regular basis.
*Use vinegar-based cleaning products in the bathroom and kitchen areas in your home.
*Keeping your home under or at 75 degrees Fahrenheit can stunt, slow, and even prevent the growth of mold.
*Keeping the humidity level in your home at or below 54 percent will help slow, stunt, and prevent the growth of indoor mold.
*Thoroughly wash and dry any rugs, clothing, curtains, or other fabric that has been affected by mold
*Some porous surfaces, such as wood, cannot be completely rid of indoor mold. Things that cannot be thoroughly cleaned should be thrown away or replaced. For instance, moldy wood should be sanded down.
*Sold surfaces should be scrubbed with an organic soap of some kind.
*Clean any and all areas that have been affected by a mold with a solution of 1 part chlorine bleach and three parts water. Let the solution sit on the mold for around an hour to kill the mold.
Control Temperature and Humidity
Keeping the temperature and humidity in your home under control are the two best ways to ensure that your home will be mold free. Upkeep in the condition of the pipes, roof, and other areas that are prone to water damage and moisture will also help. By following the above tips, your home should stay mold free.